| ART.code | Maat | d3 | Z1 | Z2 | H | C | E | Type | Verp | |
|---|---|---|---|---|---|---|---|---|---|---|
| 5.24.011 | 10/12 | 4.5 | 11 | 13.5 | 20 | 10 | 12 | D | 500 (50x10) | informations |
| 5.24.016 | 16 | 5.5 | 14 | 16.5 | 20 | 10 | 16 | E | 400 (40x10) | informations |
| 5.24.020 | 20 | 5.5 | 16.5 | 19 | 20 | 10 | 16 | E | 400 (40x10) | informations |
| 5.24.025 | 25 | 5.5 | 19 | 21.5 | 20 | 10 | 16 | E | 800 (80x10) | informations |
| 5.24.032 | 32 | 5.5 | 24 | 26.5 | 20 | 10 | 16 | E | 600 (60x10) | informations |
| 5.24.033 | 32 | 6.5 | 28.5 | 28.5 | 20 | 10 | 22 | E | 400 (40x10) | informations |
| 5.24.040 | 40 | 6.5 | 33.5 | 33.5 | 20 | 10 | 22 | E | 500 (50x10) | informations |
| 5.24.050 | 50 | 6.5 | 37 | 37 | 20 | 10 | 22 | E | 500 (50x10) | informations |
| 5.24.063 | 63 | 8.5 | 44.5 | 44.5 | 20 | 10 | 25 | E | 150 (15x10) | informations |
| 5.24.075 | 75 | 8.5 | 52 | 52 | 20 | 10 | 25 | E | 80 (8x10) | informations |
| 5.24.090 | 90 | 8.5 | 64.5 | 64.5 | 20 | 10 | 28 | E | 100 (10x10) | informations |
| 5.24.110 | 110 | 8.5 | 78 | 78 | 20 | 10 | 28 | E | 80 (8x10) | informations |
| 5.24.125 | 125 | 8.5 | 88 | 88 | 20 | 10 | 31.5 | E | 150 (15x10) | informations |
| 5.24.140 | 140 | 8.5 | 97 | 97 | 20 | 10 | 31.5 | E | 140 (14x10) | informations |
| 5.24.160 | 160 | 8.5 | 109 | 109 | 20 | 10 | 31.5 | E | 120 (12x10) | informations |
Matière
- PP = Polypropylène
Fabrication
- Moulé par injection
Modèles CAD
Résistance chimique
Pression / température
Certificats de qualité